NSE7_EFW-6.4 practice exam

[PDF and VCE] Format for Free NSE7_EFW-6.4 Dumps With Exam Questions Download

Attention please! Here is the shortcut to pass your Jul 03,2022 Newest NSE7_EFW-6.4 practice exam! Get yourself well prepared for the Fortinet Certification Latest NSE7_EFW-6.4 pdf dumps Fortinet NSE 7 – Enterprise Firewall 6.4 exam is really a hard job. But don’t worry! We We, provides the most update NSE7_EFW-6.4 braindumps. With We latest NSE7_EFW-6.4 pdf, you’ll pass the Fortinet Certification Hotest NSE7_EFW-6.4 vce dumps Fortinet NSE 7 – Enterprise Firewall 6.4 exam in an easy way

We Geekcert has our own expert team. They selected and published the latest NSE7_EFW-6.4 preparation materials from Official Exam-Center.

The following are the NSE7_EFW-6.4 free dumps. Go through and check the validity and accuracy of our NSE7_EFW-6.4 dumps.The following questions and answers are from the latest NSE7_EFW-6.4 free dumps. It will help you understand the validity of the latest NSE7_EFW-6.4 dumps.

Question 1:

View the exhibit, which contains the partial output of an IKE real-time debug, and then answer the question below.

Which statements about this debug output are correct? (Choose two.)

A. The remote gateway IP address is

B. It shows a phase 1 negotiation.

C. The negotiation is using AES128 encryption with CBC hash.

D. The initiator has provided remote as its IPsec peer ID.

Correct Answer: BD

Question 2:

Refer to the exhibit, which contains the partial output of a diagnose command.

Based on the output, which two statements are correct? (Choose two.)

A. Anti-replay is enabled

B. The remote gateway IP is

C. DPD is disabled.

D. Quick mode selectors are disabled.

Correct Answer: AB

Question 3:

Refer to the exhibit, which shows the output of a debug command.

Which two statements about the output are true? (Choose two.)

A. The local FortiGate OSPF router ID is

B. Port4 is connected to the OSPF backbone area.

C. In the network connected to port4, two OSPF routers are down.

D. The local FortiGate is the backup designated router.

Correct Answer: AB

Area is the backbone area.

Question 4:

Examine the output from the \’diagnose debug authd fsso list\’ command; then answer the question below.

# diagnose debug authd fsso list –FSSO logons-IP: User: STUDENT Groups: TRAININGAD/

USERS Workstation: INTERNAL2. TRAINING. LAB The IP address is NOT the one used by

the workstation INTERNAL2. TRAINING.


What should the administrator check?

A. The IP address recorded in the logon event for the user STUDENT.

B. The DNS name resolution for the workstation name INTERNAL2. TRAINING. LAB.

C. The source IP address of the traffic arriving to the FortiGate from the workstation INTERNAL2. TRAINING. LAB.

D. The reserve DNS lookup forthe IP address

Correct Answer: C

Question 5:

View the IPS exit log, and then answer the question below.

# diagnose test application ipsmonitor 3

ipsengine exit log”

pid = 93 (cfg), duration = 5605322 (s) at Wed Apr 19 09:57:26 2017

code = 11, reason: manual

What is the status of IPS on this FortiGate?

A. IPS engine memory consumption has exceeded the model-specific predefined value.

B. IPS daemon experienced a crash.

C. There are communication problems between the IPS engine and the management database.

D. All IPS-related features have been disabled in FortiGate\’s configuration.

Correct Answer: D

The command diagnose test application ipsmonitor includes many options that are useful for troubleshooting purposes.Option 3 displays the log entries generated every time an IPS engine process stopped. There are various reasons why these logs are generated:Manual: Because of the configuration, IPS no longer needs to run (that is, all IPS-releated features have been disabled)

Question 6:

View the exhibit, which contains the output of diagnose sys session stat, and then answer the question below.

Which statements are correct regarding the output shown? (Choose two.)

A. There are 0 ephemeral sessions.

B. All the sessions in the session table are TCP sessions.

C. No sessions have been deleted because of memory pages exhaustion.

D. There are 166 TCP sessions waiting to complete the three-way handshake.

Correct Answer: AC


Question 7:

An administrator has configured the following CLI script on FortiManager, which failed to apply any changes to the managed device after being executed.

Why didn\’t the script make any changes to the managed device?

A. Commands that start with the # sign are not executed.

B. CLI scripts will add objects only if they are referenced by policies.

C. Incomplete commands are ignored in CLI scripts.

D. Static routes can only be added using TCL scripts.

Correct Answer: A

https://help.fortinet.com/fmgr/50hlp/56/5-6-2/FortiManager_Admin_Guide/1000_Device% 20Manager/2400_Scripts/1000_Script sa mples/0200_CLI scripts .htm#Error_Messages

A sequence of FortiGate CLI commands, as you would type them at the command line. A comment line starts with the number sign (#). A comment line will not be executed.

Question 8:

View the exhibit, which contains the output of a debug command, and then answer the question below.

Which of the following statements about the exhibit are true? (Choose two.)

A. In the network on port4, two OSPF routers are down.

B. Port4 is connected to the OSPF backbone area.

C. The local FortiGate\’s OSPF router ID is

D. The local FortiGate has been elected as the OSPF backup designated router.

Correct Answer: BC

Question 9:

What configuration changes can reduce the memory utilization in a FortiGate? (Choose two.)

A. Reduce the session time to live.

B. Increase the TCP session timers.

C. Increase the FortiGuard cache time to live.

D. Reduce the maximum file size to inspect.

Correct Answer: AD

Question 10:

The CLI command set intelligent-mode controls the IPS engine\’s adaptive scanning behavior. Which of the following statements describes IPS adaptive scanning?

A. Determines the optimal number of IPS engines required based on system load.

B. Downloads signatures on demand from FDS based on scanning requirements.

C. Determines when it is secure enough to stop scanning session traffic.

D. Choose a matching algorithm based on available memory and the type of inspection being performed.

Correct Answer: C

Configuring IPS intelligenceStarting with FortiOS 5.2, intelligent-mode is a new adaptive detection method. This command is enabled the default and it means that the IPS engine will perform adaptive scanning so that, for some traffic, the FortiGate can quickly finish scanning and offload the traffic to NPU or kernel. It is a balanced method which could cover all known exploits. When disabled, the IPS engine scans every single byte.config ips globalset intelligent-mode {enable|disable}end

Question 11:

Which two statements about the Security Fabric are true? (Choose two.)

A. Only the root FortiGate collects network information and forwards it to FortiAnalyzer.

B. FortiGate uses FortiTelemetry protocol to communicate with FortiAnalyzer.

C. All FortiGate devices in the Security Fabric must have bidirectional FortiTelemetry connectivity.

D. Branch FortiGate devices must be configured first.

Correct Answer: BC

Reference: https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/327890/deploying-security-fabric

Question 12:

Which of the following statements are correct regarding application layer test commands? (Choose two.)

A. They are used to filter real-time debugs.

B. They display real-time application debugs.

C. Some of them display statistics and configuration information about a feature or process.

D. Some of them can be used to restart an application.

Correct Answer: CD

Application layer test commands don\’t display info in real time, but they do show statistics and configuration info about a feature or process. You can also use some of these commands to restart a process or execute a change in its operation.

Question 13:

View the exhibit, which contains the output of a diagnose command, and the answer the question below.

Which statements are true regarding the Weight value?

A. Its initial value is calculated based on the round trip delay (RTT).

B. Its initial value is statically set to 10.

C. Its value is incremented with each packet lost.

D. It determines which FortiGuard server is used for license validation.

Correct Answer: C

Question 14:

What is the purpose of an internal segmentation firewall (ISFW)?

A. It inspects incoming traffic to protect services in the corporate DMZ.

B. It is the first line of defense at the network perimeter.

C. It splits the network into multiple security segments to minimize the impact of breaches.

D. It is an all-in-one security appliance that is placed at remote sites to extend the enterprise network.

Correct Answer: C

ISFW splits your network into multiple security segments. They serve as a breach containers from attacks that come from inside.

Question 15:

View the global IPS configuration, and then answer the question below.

Which of the following statements is true regarding this configuration?

A. IPS will scan every byte in every session.

B. FortiGate will spawn IPS engine instances based on the system load.

C. New packets will be passed through without inspection if the IPS socket buffer runs out of memory.

D. IPS will use the faster matching algorithm which is only available for units with more than 4 GB memory.

Correct Answer: A