NSE 7 Network Security Architect

[PDF and VCE] Free NSE7_SDW-6.4 PDF Real Exam Questions and Answers Free Download

Attention please! Here is the shortcut to pass your NSE7_SDW-6.4 exam! Get yourself well prepared for the NSE 7 Network Security Architect NSE7_SDW-6.4 Fortinet NSE 7 – SD-WAN 6.4 exam is really a hard job. But don’t worry! We We, provides the most update NSE7_SDW-6.4 pdf. With We latest latest NSE7_SDW-6.4 dumps, you’ll pass the NSE 7 Network Security Architect NSE7_SDW-6.4 Fortinet NSE 7 – SD-WAN 6.4 exam in an easy way

Visit our site to get more NSE7_SDW-6.4 Q and As:https://www.geekcert.com/nse7_sdw-6-4.html (35 QAs Dumps)
Question 1:

Refer to exhibits.

Exhibit A shows the traffic shaping policy and exhibit B shows the firewall policy.

FortiGate is not performing traffic shaping as expected, based on the policies shown in the exhibits.

To correct this traffic shaping issue on FortiGate, what configuration change must be made on which


A. The URL category must be specified on the traffic shaping policy.

B. The shaper mode must be applied per-IP shaper on the traffic shaping policy.

C. The web filter profile must be enabled on the firewall policy.

D. The application control profile must be enabled on the firewall policy.

Correct Answer: C

Question 2:

Which statement defines how a per-IP traffic shaper of 10 Mbps is applied to the entire network?

A. The 10 Mbps bandwidth is shared equally among the IP addresses.

B. Each IP is guaranteed a minimum 10 Mbps of bandwidth.

C. FortiGate allocates each IP address a maximum 10 Mbps of bandwidth.

D. A single user uses the allocated bandwidth divided by total number of users.

Correct Answer: C



Question 3:

Which three parameters are available to configure SD-WAN rules? (Choose three.)

A. Application signatures

B. Incoming interface

C. Internet service database (ISDB) address object

D. Source and destination IP address

E. Type of physical link connection

Correct Answer: CDE

Question 4:

Which diagnostic command you can use to show interface-specific SLA logs for the last 10 minutes?

A. diagnose sys virtual-wan-link health-check

B. diagnose sys virtual-wan-link log

C. diagnose sys virtual-wan-link sla-log

D. diagnose sys virtual-wan-link intf-sla-log

Correct Answer: C

Reference: https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/943037/sla-logging

Question 5:

Which diagnostic command can you use to show the SD-WAN rules interface information and state?

A. diagnose sys virtual-wan-link route-tag-list.

B. diagnose sys virtual-wan-link service.

C. diagnose sys virtual-wan-link member.

D. diagnose sys virtual-wan-link neighbor.

Correct Answer: C

Reference: https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/818746/sd-wan-related-diagnosecommands

Question 6:

Refer to exhibits.

Exhibit A shows the performance SLA exhibit B shows the SD-WAN diagnostics output. Based on the exhibits, which statement is correct?

A. Port1 became dead because no traffic was offload through the egress of port1.

B. SD-WAN member interfaces are affected by the SLA state of the inactive interface.

C. Both SD-WAN member interfaces have used separate SLA targets.

D. The SLA state of port1 is dead after five unanswered requests by the SLA servers.

Correct Answer: D

Question 7:

Which statement is correct about the SD-WAN and ADVPN?

A. Spoke support dynamic VPN as a static interface.

B. Dynamic VPN is not supported as an SD-WAN interface.

C. ADVPN interface can be a member of SD-WAN interface.

D. Hub FortiGate is limited to use ADVPN as SD-WAN member interface.

Correct Answer: C

Question 8:

Refer to exhibits.

Exhibit A shows the source NAT global setting and exhibit B shows the routing table on FortiGate.

Based on the exhibits, which two statements about increasing the port2 interface priority to 20 are true? (Choose two.)

A. All the existing sessions that do not use SNAT will be flushed and routed through port1.

B. All the existing sessions will continue to use port2, and new sessions will use port1.

C. All the existing sessions using SNAT will be flushed and routed through port1.

D. All the existing sessions will be blocked from using port1 and port2.

Correct Answer: BC

Question 9:

Which components make up the secure SD-WAN solution?

A. FortiGate, FortiManager, FortiAnalyzer, and FortiDeploy

B. Application, antivirus, and URL, and SSL inspection

C. Datacenter, branch offices, and public cloud

D. Telephone, ISDN, and telecom network

Correct Answer: A

Question 10:

Refer to the exhibit.

Which two statements about the status of the VPN tunnel are true? (Choose two.)

A. There are separate virtual interfaces for each dial-up client.

B. VPN static routes are prevented from populating the FortiGate routing table.

C. FortiGate created a single IPsec virtual interface that is shared by all clients.

D. is one of the remote IP address that comes through index interface 1.

Correct Answer: CD

Question 11:

Refer to exhibits.

Exhibit A shows the SD-WAN rules and exhibit B shows the traffic logs. The SD-WAN traffic logs reflect how FortiGate processed traffic.

Which two statements about how the configured SD-WAN rules are processing traffic are true? (Choose two.)

A. The implicit rule overrides all other rules because parameters widely cover sources and destinations.

B. SD-WAN rules are evaluated in the same way as firewall policies: from top to bottom.

C. The All_Access_Rules rule load balances Vimeo application traffic among SD-WAN member interfaces.

D. The initial session of an application goes through a learning phase in order to apply the correct rule.

Correct Answer: AB

Question 12:

What are the two minimum configuration requirements for an outgoing interface to be selected once the SD-WAN logical interface is enabled? (Choose two.)

A. Specify outgoing interface routing cost.

B. Configure SD-WAN rules interface preference.

C. Select SD-WAN balancing strategy.

D. Specify incoming interfaces in SD-WAN rules.

Correct Answer: AB

Question 13:

Refer to the exhibit.

Based on the exhibit, which statement about FortiGate re-evaluating traffic is true?

A. The type of traffic defined and allowed on firewall policy ID 1 is UDP.

B. Changes have been made on firewall policy ID 1 on FortiGate.

C. Firewall policy ID 1 has source NAT disabled.

D. FortiGate has terminated the session after a change on policy ID 1.

Correct Answer: B

Question 14:

What are two reasons why FortiGate would be unable to complete the zero-touch provisioning process? (Choose two.)

A. The FortiGate cloud key has not been added to the FortiGate cloud portal.

B. FortiDeploy has connected with FortiGate and provided the initial configuration to contact FortiManager.

C. FortiGAte has obtained a configuration from the platform template in FortiGate cloud.

D. A factory reset performed on FortiGate.

E. The zero-touch provisioning process has completed internally, behind FortiGate.

Correct Answer: AE

Question 15:

Which two statements reflect the benefits of implementing the ADVPN solution to replace conventional VPN topologies? (Choose two.)

A. It creates redundant tunnels between hub-and-spokes, in case failure takes place on the primary links.

B. It dynamically assigns cost and weight between the hub and the spokes, based on the physical distance.

C. It ensures that spoke-to-spoke traffic no longer needs to flow through the tunnels through the hub.

D. It provides direct connectivity between all sites by creating on-demand tunnels between spokes.

Correct Answer: CD

Visit our site to get more NSE7_SDW-6.4 Q and As:https://www.geekcert.com/nse7_sdw-6-4.html (35 QAs Dumps)